How to Set Up Your Duty Holster Package: A Step-by-Step Guide
Published by Dara Holsters on 22nd May 2024
Introduction
Welcome back, everyone! Today, we're diving into one of our most popular products: the Duty Package. This package includes a belt, three pistol mag carriers, and one rifle mag carrier. I'll walk you through the setup process, including tips on using the DM2 Molle attachment, which we often get questions about. Let's get started!
Step 1: Preparing the Inner Belt
First, take out the inner belt from the package. You will need to cut this to size to fit your waist. If you haven't done this before, check out our instructional video by clicking the link provided in the description. Additionally, the package includes detailed instructions to help you set up the belt properly.
Step 2: Attaching the Holster
Once your inner belt is ready, it's time to attach the holster. Follow these steps:
- Open the belt and slide the holster attachment onto the belt.
- Turn the end of the belt slightly to make it easier to slide the attachment over.
- Pull the attachment through until it is securely in place.
- Position the holster on the right side of the belt.
Step 3: Setting Up the Pistol Mag Carriers
Next, set up the pistol mag carriers. These carriers come with a quick loop for easy attachment:
- Decide where you want to place the pistol mag carriers on the belt.
- Attach the quick loops to the belt, ensuring they are securely fastened.
- Adjust the position if necessary to ensure a comfortable and accessible setup.
Step 4: Attaching the DM2 Molle Attachment
The DM2 Molle attachment can be a bit tricky, but with these steps, you'll have it set up in no time:
- Decide where you want the DM2 Molle attachment on your belt.
- Separate the slot on your DM2 and use the included popsicle stick to make the process easier.
- Slide the top end of the Molle attachment down through the first webbing on the inside of the belt.
- Lift the bottom side of the belt to see where the attachment line comes in and weave it back through the center strap on the DM2.
- Use the popsicle stick to help thread the attachment through the center webbing of the DM2.
- Push the attachment down until it threads through easily and is securely in place.
Step 5: Positioning the Rifle Mag Carrier
Position the rifle mag carrier according to your preference. Many people prefer it further back on the belt:
- Lay the belt out flat and decide on the placement.
- Separate the slot on the DM2 as you did earlier and weave the attachment through the webbing.
- Secure the rifle mag carrier in place.
Step 6: Final Adjustments and Holster Setup
Make any final adjustments to the position of your mag carriers and holster to ensure they are in the most accessible and comfortable locations for you. For the quick disconnect holster:
- Press down on the top button.
- Push the holster in and slide it forward.
- Secure the manual lock and safety at the back.
- Use the one-inch webbing velcro for the thigh strap, sliding it through the thigh strap adapter and securing it in place.
Conclusion
And there you have it! Your Duty Package is now set up and ready to go. By following these steps, you can ensure that your gear is securely attached and positioned for optimal performance. If you have any questions or need further assistance, feel free to reach out. Thanks for watching, and stay safe out there!