NEW! Mounted Holster System using RAM Mounts by Dara Holsters

NEW! Mounted Holster System using RAM Mounts by Dara Holsters

Published by Dana Vogel on 25th Aug 2015

The Ultimate Holster Mounting System: the rugged and reliable Dara Holster, coupled with America's leading Mounting Structures- RAM Mounts™.

Mountable Vehicle Holster

Dara Holster Mounting System

Introducing our new Patent Pending Mounted Holster System using RAM Mounts™. This Vehicle Mounted Holster is 100% made in the USA and securely fastened to the RAM Mount™ using Melonite and Zinc coated hardened steel hardware. Our rugged Kydex/Boltaron holsters, coupled with America's leading mounting structure, makes for the ultimate mounted self defense and protection system.

Mountable Glock 43 HolsterMounted Vehicle Holster Dashboard

Retention Levels

Mountable Holster with Level 2 Retention

The new Dara Mounted Holster System is available in both Standard Retention and Level II Retention. Both Holsters will feature an Adjustable Military Grade Rubber Retention System. The adjustable retention system can be tightened or loosened to the desired holding using a Philips head screwdriver. The Standard Retention Holster will be available in two models: The RMR Cut Mounted Holster and the Standard Mounted Holster with full ejection port coverage.
The second level of retention featured on the Level II Duty Mounted Holster is our ever reliable Thumb Throw Retention System. This system consists of a manually rotating hood, held in the upwards position by a molded detent. To draw the firearm, one needs to overcome the detent, similar to the tight operating safety of a an AR-15 variant rifle.


The Mounted Holster System Packages will include the holster, the RAM Mount™ 1.0" High Impact Resistant Poly coated ball, the mounting hardware (Stainless Steel M6 bolt, nut, and washer), and the Customer's choice of RAM™ Receiving Mount. Three mounting option packages will be available for purchase: The Flat Surface Mount, the Tough-Wedge, and the Tough-Claw™ Base Mount. The Tough-Claw™ Base can be mounted to rails with an outer diameter of 0.625"-1.5". This will be suitable for Motorcycle and Bicycle handlebars, the yoke of an aircraft, kayak rails, roll bars, ATV racks, and more.
Additional Holsters with diamond mounting plate and 1.0" Poly coated ball will be available for purchase separate, as well as separate Mounting Systems. All Mounted Holsters are intended for the mounting system and will not be interchangeable with belt attachments.

Available Now

The Standard, RMR Cut, and Duty Mounted Holster is now ready for purchase with the Flat Surface Mounting System. The other Mounting Systems mentioned below will be available for purchase to the public September 1st.

Click to browse all available Mounted Holster Packages.

Duncan L purchased: for 5 minutes ago.
Alex M purchased: for 16 minutes ago.
Paul W purchased: for 19 minutes ago.
Sam P purchased: for 27 minutes ago.