If you are looking to attach an omnivore holster to your Dara ALQD system, please read. First, make sure you purchase an ALQD "mount" to go along with the bridge. I didn't realize I was missing this component, but luckily, I took one off one of my Dara holsters to mount on the Omnivore. Next, some of the screws are not properly listed in the manual. The (J) 5/16" allen screws are listed for Blackhawk, but this did not work. For the Omnivore, I ended up using the (A) 3/8 Phillips screws, which had the proper pitch and enough length. Other than that, the installation is similar to the video, and it attaches great. I hope this helps anyone else, and hopefullly Dara may put out some more info regarding this.

The Bridge is well thought out adapter! Went together fairly quick and had no issues whatsoever so ever. Still playing around with my set up and still to torque the screws and lock tight em. Even having it hand tight there is no movement once together and I can draw my sidearm without any worry it will come apart. Def a must have!

Simple adaptor from G-Code holster to Safariland QLS

I used the bridge to attach a Dara ALQD to a Tek-Mount holding a Taccom 12 shell caddie. This will be my backup for long 3gun jungle type shotgun runs. Went together strait forward and is holding strong.

Ordered and received the bridge very quickly. The holster was another story but that’s irrelevant. I purchased the bridge hoping it would permit me to use a G-Code XST level 2 holster with a safariland QLS system to maintain the ability to change between my personal and issued holsters. I’m very pleased to report that it works flawlessly. All of the necessary hardware was included in the standard hardware pack for the bridge. I couldn’t be more pleased with this item. I will absolutely purchase again if the need should arise.

Fit and finish are great, seems very sturdy. Pulling the pins in to place was very easy. Would buy again. I bought this to fit a dara holster to the safariland system.

Awesome piece of kit. Plethora of options and hardware included. Extensive directions with complete fitment table. Dara did all the hardwork.

Exelent

I have an Orpaz retention holster for a CZ P07. Recently I started to use the Safariland QLS system for a light bearing CZ P10C. The Bridge allows me to connect a QLS fork to the Orpaz holster so now I can use either of my CZ's with the same belt and swap them out easily

Purchased to attach my Dara LightBearing Holster for my FN-FNX45 Tactical to BladeTech quick release on mid drop on Battle Belt . Impressive instructions where Dara has done the research for any combo of holster and attachment available. Now can swap seamlessly between my 9mm and 45 depending on mission.