OWB HOLSTER

Our Outside the Waistband Holster is the BEST OWB Holster on the market.

Formed using rigid .093" thick Kydex or Boltaron and molded precisely to your exact firearm. Fastened securely using rust resistant Stainless Steel hardware anchored by lock washers, using hardware designed and built specifically for our holsters.

Each OWB Holster is adaptable to an array of belt attachment options. You choose what option works best for you.

The Quick Loop:
The Quick Loop hinges at the top, snaps over and around the belt, and locks into place for a quick on/off solution. The Quick Loop can be adjusted to fit belts with a width of 1.5", 1.75", 2" or 2.25". It also offers adjustable incremental cant angles of -30°, -15°, 0°, 15° and 30°. The Quick Loop is also adaptable to our Drop Offset attachment or DBL2/L used as a drop attachment.

The Double Loop:
The Double Loop is our standard OWB Belt attachment. The belt slides through the double loop on each side and adjusts for belt widths of 1.5", 1.75", 2" or 2.25". The user can adjust the cant angle in increments from -15°, -7.5°, 0°, 7.5° to 15°. It's also adaptable to our ALQD System, Drop Offset attachment and the DBL2/L used as a drop attachment.

The DBL1:
The DBL1 is our newest belt attachment, machined in house from 6061 T6 billet aluminum. This attachment offers a customized fit for belts ranging from 1.5" to 2.25" and an adjustable cant angle of 30° forward to 30° backward. The DBL1 is adaptable to our ALQD system. For a Drop version, see our DBL2 or DBL2-L.

Every OWB Holster features an adjustable rubber retention system. This system allows you to tune your draw resistance using a Philips head screwdriver. Each OWB Holster is test fit and draw weight tested prior to shipment to ensure a perfect fit and retention. When the firearm is fully seated within the holster, the user will hear an audible "click" to indicate that your pistol is secure. At this point you will be able to hold your holster upside down and shake without your firearm dislodging. Should you need a second level of retention, please see our Level 2 Duty Holster. 

We offer our OWB Holster in a light/laser bearing variant for over 300 configurations. Check out our Light bearing OWB Holster if you have a WML on your firearm.

All Dara Holsters, including the OWB Holster, come standard with an optic cut. All holsters come optics ready with a .5" tall sight channel enhanced for co-witness and suppressor height sights. However, if you have a forward sitting optic such as the Trijicon SRO or RMR HD, please check the box on the order form as these optics require a deeper optic cut.

All edges are rounded and polished for a comfortable, snag-free carry. 

Dara Holsters Custom Kydex OWB Holster

• Made to order for over 350 firearms.
• Rigid, reliable, and fully adjustable for a perfect fit.
• Raise the bar with our custom Kydex OWB holster.
• Handcrafted in our North Carolina shop with attention to detail and quality.
• Five signature-required quality checks ensure your order goes out perfect.
• Covers all the basics - trigger guard and magazine release button always covered.
• Accommodate threaded barrels, suppressor height sights, extended magazine release buttons, slide locks, etc.
• Light/laser bearing holsters available.
• Choose from paddle attachment, clip, quick loop, single or double loops for mounting to the belt, or pair with a molle attachment. All adaptable to our ALQD Auto Locking Quick Disconnect System.
• Backed by a no BS Lifetime Warranty!

This OWB holster is perfect for open carry or range use. It is made from high-quality Kydex or Boltaron and is designed to be rigid and reliable. The adjustable retention system allows you to get a perfect fit, and the five signature-required quality checks ensure that your order is perfect. Whether you have a standard or customized firearm, Dara Holsters can make an OWB holster that is right for you.