DARA

IWB HOLSTER

367 reviews 367 reviews Write a Review
If you're looking for a dependable inside-the-waistband (IWB) holster for everyday concealed carry, you've found it. Every Dara IWB Holster is custom molded for…
SKU:
$58.99
Hurry up! Current stock:
5 customers are viewing this product

If you're looking for a dependable inside-the-waistband (IWB) holster for everyday concealed carry, you've found it. Every Dara IWB Holster is custom molded for your exact firearm, giving you a secure fit, smooth draw, and comfortable all-day carry without unnecessary bulk.

Each holster is handcrafted in North Carolina from durable .093" Boltaron, a material chosen for its strength, heat resistance, and ability to maintain its shape over years of daily use. The trigger guard is fully covered, while the magazine release remains protected inside the holster for safe, confident carry.

Our IWB Holster comes standard with adjustable retention, allowing you to fine-tune the amount of resistance during the draw. Every holster is also red dot optic ready and features an extended sight channel that accommodates most suppressor-height and co-witness sights up to 0.5 inches tall.

Comfort matters just as much as performance. That's why every edge is rounded and polished to reduce hot spots against your body and minimize wear on clothing. The sweat shield follows the rear of the slide to help improve comfort while reducing the chance of pinching during reholstering.

Whether you carry appendix, strong side, or behind the hip, the Dara IWB Holster is designed to disappear under everyday clothing while providing the consistent retention and reliability serious concealed carriers expect.

Key Features

  • Custom molded for your exact firearm model
  • Precision-formed .093" Boltaron construction
  • Adjustable passive retention
  • Fully covers the trigger guard
  • Optics ready
  • Fits most suppressor-height sights up to 0.5"
  • Rounded, polished edges for improved comfort
  • Comfortable sweat shield design
  • Stainless steel hardware with thread locker applied during assembly
  • Multiple belt attachment options for belts from 1.5" to 2.25"
  • Made in the USA
  • Backed by Dara's Lifetime Warranty

Quality You Can Trust

Every Dara IWB Holster is individually built and inspected before it leaves our shop. Each holster undergoes a draw retention test and five separate quality inspections to ensure proper fit, retention, finish, and hardware installation.

Choosing Your Belt Attachment

Select the belt attachment that best matches how you carry.

  • 1.5" belts are the most common for everyday concealed carry.
  • 1.75" belts are commonly used with tactical and reinforced carry belts.
  • 2.0" and 2.25" options are available for select duty and heavy-duty applications.

Ordering the Correct Holster

Please select your exact firearm make and model before ordering. Because every holster is molded specifically for the firearm you choose, details such as threaded barrels, compensators, aftermarket frames, or other external modifications may affect fitment if they are not selected during the ordering process.

Using a weapon-mounted light or laser? Be sure to choose our Light-Bearing IWB Holster, which is specifically designed around compatible firearm and light combinations.

Want an IWB Holster with detachable mag carrier? Check out our Dara Concealment System.

Dara Lifetime Guarantee
Our gear is built to last a lifetime but in the event it becomes damaged or defective we will repair or replace your Dara-manufactured and branded products- excluding apparel, patches, and stickers- for free. If we cannot repair your product, we will replace it with a new, current generation product of equal or greater value.
367 reviews
  • Nice! 5

    Posted by Steve Ford on Apr 02, 2015

    I am very pleased with the workmanship and customer service.

  • Great holster 5

    Posted by Greg on Apr 02, 2015

    These holsters are great. Very light and keep their shape throughout their life. I own two of them so far and will keep buying them. Great customer service as well, they go above and beyond.

  • Well Worth The Wait 5

    Posted by Randy Hilliard on Mar 28, 2015

    Bought a black carbon fiber ECR ready IWB holster for my Glock g30s with a Viridian C5L laser/light. Very happy with it when it arrived. Fit the gun like a glove the ECR works perfect,yes it took some time to get it but it is custom and not just being pulled off the shelf in a warehouse. First time I wore it after about an hour barely knew I had it on . Would I buy another? Absolutely! Recommend it? Absolutely.Don't be surprised if I end up ordering a matching double mag holder. Thank you for great service and an excellent product.

  • great holster 5

    Posted by Jason on Mar 28, 2015

    I have a FNX-9 that I wanted to conceal carry. The gun is a bit big for conceal carry, but the holster hides it well on my lower back. I've only had it a week or so now and I really like it. The carbon fiber looks great and I have no worries of my gun falling out. It's a snug fit! Great holster, I'll order another one when I get a smaller gun... Maybe the FNS-9 compact that just came out...

  • Nice Holster 5

    Posted by Jim Kendrick on Mar 19, 2015

    I think the holster is nice, but overpriced. I had to wait around five weeks to received it. That is too long. Once it arrived the laser light magnet had been left off, had to send it back to have it installed. The workmanship was good, but again way to long to arrive. Need better quality control to be sure holsters going out are are completely finished before shipping.

  • Not too bad 5

    Posted by Unknown on Mar 11, 2015

    Good quality kydex used for this holster. Carbon fiber finish looks nice. Slight molding issue near trigger guard.. doesn't quite follow contour. Perhaps alittle too much removed, however.. I can live with it. Customer service was very polite when I checked status of order. I would definitely recommend DARA HOLSTERS to all wanting a quality holster. Be patient.. they're busy! Dara Holsters: The area removed on the trigger guard is NOT a molding issue. We clear away a small area where the trigger guard meets the grip so that you get a full purchase on your firearm as well as to avoid getting pinched when re-holstering. The open area and the rest of the trigger guard remains covered and protected for safety. Please see photos for this cut on our FAQ's page.

  • Great people to do business with 5

    Posted by Ted Rosenberg on Mar 10, 2015

    Had some problems with the belt clip fitting on my 1.75 instructor belt, but they sent me the correct size and the product is first class.

  • The professional citizen 5

    Posted by Allen on Mar 04, 2015

    It is a good product. The wait is a bit long (almost 4 weeks). But, for a high quality product, with high demand, it is understandable. They made a holster and a single mag carrier. Beautiful products (carbon fiber). They work well, and met met my standards. They are a little uncomfortable directly against the body. But, that's the reality of a hard plastic against flesh. I like the product, and have only carried using the products a few weeks. But, i would definitely recommend the product for the professional citizen conceal carry force multiplier. The responsibility of public safety is a shared responsibility both professional (law enforcement) and professional citizens (competent conceal carry).

  • The best holster that I have ever used! 5

    Posted by Joseph Costello on Feb 18, 2015

    Perfection! I just ordered another one for my HK P2000.

  • Great custom made holster 5

    Posted by Scotty on Feb 14, 2015

    Holster was produced to my exact specifications, the build quality and materials are superb. Thanks for making a great product.

Description

If you're looking for a dependable inside-the-waistband (IWB) holster for everyday concealed carry, you've found it. Every Dara IWB Holster is custom molded for your exact firearm, giving you a secure fit, smooth draw, and comfortable all-day carry without unnecessary bulk.

Each holster is handcrafted in North Carolina from durable .093" Boltaron, a material chosen for its strength, heat resistance, and ability to maintain its shape over years of daily use. The trigger guard is fully covered, while the magazine release remains protected inside the holster for safe, confident carry.

Our IWB Holster comes standard with adjustable retention, allowing you to fine-tune the amount of resistance during the draw. Every holster is also red dot optic ready and features an extended sight channel that accommodates most suppressor-height and co-witness sights up to 0.5 inches tall.

Comfort matters just as much as performance. That's why every edge is rounded and polished to reduce hot spots against your body and minimize wear on clothing. The sweat shield follows the rear of the slide to help improve comfort while reducing the chance of pinching during reholstering.

Whether you carry appendix, strong side, or behind the hip, the Dara IWB Holster is designed to disappear under everyday clothing while providing the consistent retention and reliability serious concealed carriers expect.

Key Features

  • Custom molded for your exact firearm model
  • Precision-formed .093" Boltaron construction
  • Adjustable passive retention
  • Fully covers the trigger guard
  • Optics ready
  • Fits most suppressor-height sights up to 0.5"
  • Rounded, polished edges for improved comfort
  • Comfortable sweat shield design
  • Stainless steel hardware with thread locker applied during assembly
  • Multiple belt attachment options for belts from 1.5" to 2.25"
  • Made in the USA
  • Backed by Dara's Lifetime Warranty

Quality You Can Trust

Every Dara IWB Holster is individually built and inspected before it leaves our shop. Each holster undergoes a draw retention test and five separate quality inspections to ensure proper fit, retention, finish, and hardware installation.

Choosing Your Belt Attachment

Select the belt attachment that best matches how you carry.

  • 1.5" belts are the most common for everyday concealed carry.
  • 1.75" belts are commonly used with tactical and reinforced carry belts.
  • 2.0" and 2.25" options are available for select duty and heavy-duty applications.

Ordering the Correct Holster

Please select your exact firearm make and model before ordering. Because every holster is molded specifically for the firearm you choose, details such as threaded barrels, compensators, aftermarket frames, or other external modifications may affect fitment if they are not selected during the ordering process.

Using a weapon-mounted light or laser? Be sure to choose our Light-Bearing IWB Holster, which is specifically designed around compatible firearm and light combinations.

Want an IWB Holster with detachable mag carrier? Check out our Dara Concealment System.

Customers Also Viewed