Holster for Glock 19 with TLR-6
Posted by Dana on Apr 03, 2017
Features C4® LED illuminator and a 640-660nm red laserDesigned to securely attach to the rail and trigger guard of the following standard and compact railed handguns:Springfield Armory® XD®, XD(M)®, and XD® MOD.2®Smith & Wesson® M&P®GLOCK® - For a current model fit list, please click here/refer to documentationParabolic reflector produces a balance of beam and peripheral illumination; optimized el
…
Video Clip: Custom AIWB Holster for Glock 26/27/33
Posted by Dana on Mar 31, 2017
Showing the Custom AIWB Holster for the Glock 26/27/33 here. Even with the Hyve Technologies +2 mag extension, the firearm stays concealed at the appendix position. The clip is easy to take on and off, and if the proper belt is worn the clip should click in and out of place as it does in the video!The Holster specs:Black, right handed for the Glock 33. Mid ride height, straight draw
…
Mounted Holsters: Mounted Right vs Mounted Left
Posted by Dana on Mar 29, 2017
If you're thinking about ordering a Mounted Holster for your vehicle, pay close attention to which side of the firearm you'll want the mount to be placed on. Below are some examples of each...As shown above, the Dara Mounted Holster on the left has the mount placed on the right. You will want this option in the following scenarios:
You are LEFT Handed and are mounting the holster under the steeri
…
Toolless Installation: Tough-Claw Mounted Holster
Posted by Dana on Mar 28, 2017
Check out our install clip of the Tough-Claw Mounted Holster:
As you can see, this three step process is very simple and needs no tools for completion. All that's needed is a bar measuring .625"-1.5" in diameter and your Tough-Claw holster. This install was done using a Jeep Grand Cherokee, which does not have much seat rail space. I have just over an inch of space on each side of the seat rai
…